VX-FT (older 1 stack) 4 to 1 Cable Assembly, Single Swivel Pulley Version

VX-FT (older 1 stack) 4 to 1 Cable Assembly, Single Swivel Pulley Version
VX-FT (older 1 stack) 4 to 1 Cable Assembly, Single Swivel Pulley Version
Product Code: 68480
Price: $218.00
Qty:  
   - OR -   

VX-FT (1 weight stack only) 4:1 Cable Assembly. Not for 2 weight stack machine.

NOTE: This cable is 526.5" Long
It is for the swiveling single pulley with rubber counterweight
For machines manufactured prior to October 2009.


Click here to view extensive cable chart listing.

You should also order 28 feet of our clear cable routing tube, PN67910.
Install directions: Remove 1 swiveling pulley, connect clear tube, pull in old cable to top of column. Remove old cable. Connect new cable at top of column and pull the clear tube and new cable back out to the swiveling pulley. Reinstall swiveling pulley.

Here is how to tell if your machine is 2:1, 4:1 or 6:1:

  • 2:1 VX-FT 1 stack has a 210 or 260 pound heaviest weight label and has 6'8" cable travel when pulling one side only and has one pulley on the top weight plate.
  • 4:1 VX-FT 1 stack has a 105 or 130 or 155 pound heaviest weight label and has 12'10" cable travel when pulling one side only and has two pulleys on the top weight plate.
  • 6:1 VX-FT 1 stack has a 70 or 87 or 103 pound heaviest weight label and has 19'0" cable travel when pulling one side only and has three pulleys on the top weight plate.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Vectra Parts Store © 2014